Locally Family Owned and Operated

dancutter robotic cutter

Emergency Call - 24/7

Dancutter Robotic Cutter

The Sewer Surgeon’s Dancutter Robotic Cutter is an innovative robotic cutter that allows The Sewer Surgeon to provide thier customers with a higher quality of service. With the Dancutter Robotic Cutter, The Sewer Surgeon can provide more work for their employees and increase efficiency. This robotic cutter will also allow The Sewer Surgeon to compete in a wider range of markets due to its increased flexibility.

Our robotic cutters are state of the art plumbing equipment, allowing our plumbing professionals to complete a cut in seconds. The Dancutter Robotic Cutter is capable of cutting up to four different types of pipe, and has been designed with safety features that protect our employees from injury.

The Dancutter allows for trenchless sewer line repair, laying of new sewer line, and pipe replacement. The Dancutter can also be used to cut off gas lines quickly in the event of an emergency. This new trenchless technology service replaces digging up the landscape which can be very costly and time consuming causing stress and money for everyone involved.

The DC Super Flex is an extremely flexible and user-friendly robotic cutter that can work in small pipes. The stainless steel frame contains 25 or 50 m supply hose which the cutter is fixed direct on to. The supply hose is supplying air, water and power to the cutter and is used to push the cutter to the working position hereafter the control of the cutter takes place on the supplied control panel.

Working area is 75 – 150 mm / 3 – 6 in. In order to work in 150 mm the skip set, that is in the toolbox, habe to be mounted. The DC Super Flex has a built-in slip ring to the camera, which allows 360° continuously rotation of the milling motor. There is also built-in lock and slip ring on the stainless steel frame, so the cutter can freely be moved back and forth with the supply hose, while operating the cutter.

The camera has a side-mounted spray nozzle for cleaning the camera lens, which is activated on the control panel, from which the continuously rotation and forward/reverse movement of the cutter is controlled by the two joystick.

Cutter has a built-in forward/backward movement of 60 mm. Raising the milling motor is controlled also at one of these joysticks. There is a built-in 12.1 ” color monitor in the lid of the control unit. The cutter can move through two successive 45° bends in a 75 mm pipe, and a 90° bend/angle of a relined 110 mm pipe.

Wheels on the stainless steel frame,provides an easy and hassle free movement to and from the workplace. There are mounted oil lubricates and water separator at the stainless steel frame. Max water content delivered by compressor per m3 supply air should be maximum: 20g/m3 .

Cutting engine consists of an air motor, which runs at up to 15,000 revolutions per minute. It has an air consumption of 650 liters/minute and need 7 bar working pressure. The compact Cutters are made from a resistant stainless steel alloy – which gives a minimum maintenance of the cutter.

The stainless steel frame measuring: Width: 500 mm. Length: 1000 mm. Height: 1050 mm.

Dancutter’s business model is based on the premise that their customers need a cutting machine to fit perfectly with their needs. They are able to take this into account and provide 100% Made in Denmark cutters for all materials, including PVC cement concrete cast iron or steel just like they have been doing since 1970 when Dancutter first started out as an engineering workshop.

Dancutter A/S produces robotic cutters for cutting, grinding, and milling in all materials. They have flexible cutter solutions that are cost-effective alternatives to digging up pipes during renovation projects when there is a need to repair sewer pipes without excavating the pipeline.

DC MINI BIKE is a flexible solution that provides fast and efficient grinding, milling inside narrow pipes of 50-70 mm diameter. No matter if the pipe material you’re working with is PVC, cement or steel our DC Mini Bike can handle it efficiently due to its Dancutter principle design which transfers into this new product as well! The concept relies on turning two handles in order for them to turn left and right while the machine’s cutter turns up or down depending on where your hand placement needs are at any given moment. You have complete control over every process involved without compromising quality because we’ve designed an intelligent way of getting through tight spaces even when they require one curved pass after another – all made possible by our intellectual engineering team.

When you call us, you can expect spotless, learned, experienced, and considerate pipes administration.

Company Mission

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis. Sed non mauris vitae erat consequat auctor eu in elit. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Mauris in erat justo.

Why Choose Us

In addition to our commitment to excellent services, here are the other advantages we offer: